JRC JMA-932B-SA - 3.8.13 Setting of NAVTEX Message Display

3-84
3
3.8 Applied Operations
y
y y
3.8.13 Setting of NAVTEX message display
By performing the following operation, it is possible to display NAVTEX message on the screen.
Notice:
To display NAVTEX message on the screen, connecting NAVTEX receiver to JMA-900B is needed.
［Ⅰ］Displaying of NAVTEX message (View Navtex)
Procedures 1 Open the NAVTEX menu by performing the menu operation below.
Main
→ Sub Menu
→ NAVTEX
NAVTEX menu will appear.
2 Select the message to display, and left-click View Navtex button.