JRC JMA-932B-SA - Load Operating State (Load User Setting); Delete Operating State (Delete User Setting)

3-98
3
3.10 Use User Setting
y
y y
3.10.2 Load Operating State (Load User Setting)
The operating state saved in the system can be loaded by performing the operation below.
When the operating state is loaded, the previous operating state data is discarded. Therefore, if you do not
want to discard the operating state data, save the operating state by performing the operation described in
Section “3.10.1 Save Operating State”.
Procedures 1 Open the User Setting menu by performing the menu operation below.
Main
→ Sub Menu
→ User Setting
The User Setting menu will appear.
2 Left-click the file name to want to load.
3 Left-click the Load User Setting.
Confirmation Window will appear.
To load the file, left-click the Yes button.
3.10.3 Delete Operating State (Delete User Setting)
The operating state saved in the system can be deleted by performing the operation below.
Use this function to delete unnecessary operating state data.
Procedures 1 Open the Delete User Setting menu by performing the menu operation
below.
Main
→ Sub Menu
→ User Setting
The Delete User Setting menu will appear.
2 Left-click the file name to want to delete.
3 Left-click the Delete User Setting.
Confirmation Window will appear.
To delete the file, left-click the Yes button.