3-40
3
3.5 Use Own Ship's Track Data
y
y y
All : the own ship’s track data of all colors is deleted.
Black / White / Gray / Blue / Green / Yellow / Pink / Red
Only the own ship’s track data of specified color is deleted.
After the item has been selected, Clear Own Track Confirmation Window will appear.
4 Left-click the Yes button.
Own ship's track data indicated by the specified color will be deleted.
3.5.5 Use Expanded Own Ship's Track (Own Track Type)
The following expanded track functions can be used for this radar system.
Water temperature track (※) : The water temperature value at the latitude/longitude is recorded.
Water depth track : The water depth value at the latitude/longitude is recorded.
Tidal current track (※) : The tidal current vector at the latitude/longitude is recorded.
Only one type of expanded own ship's track can be used at a time. Multiple types of
expanded tracks cannot be used at the same time.
Specify the type of the expanded own ship's tracks to be used by performing the operation
below.
Note:
When only the installation setting is enabled data receiving from the special navigation equipment,
the expanded own ship’s track function can be applied. Also even if the installation setting is
enabled, this function cannot be applied without input needed information.
Procedures 1 Open the Clear Own Track Color menu by performing the menu
operation below.
Main
→ Own Ship Setting
→ Own Track Setting
The Clear Own Track Color menu will appear.
2 Left-click the Track Type combobox.
The numeric value of the navigation data can be shown by the color of own ship's track.
Normal : The expanded own ship's track function is not used.
Depth : The color of the tracks is changed according to the water depth
value.
Temperature : The color of the tracks is changed according to the water
temperature value (※)
3 Select a type of its expanded own ship’s track to be used.
4 Left-click the NUM/Vector Display combobox.
Numeric value or vector of navigation data can be added to own ship's track data.
Off : Numeric value and vector are not added.
Depth : Water depth value is added.
Temperature : Water temperature value is added(※)
Current : Current vector is added(※)
To Next Page
Loading...
Need help?
General
