JRC JMA-932B-SA - 8.3 MAINTENANCE ON EACH UNIT

8-5
WARNING
Turn off the main power source before starting
maintenance.
Otherwise, an electric shock or injury may be
caused.
Turn "OFF" the safety switch to stop the scanner
unit. (Refer to section “1.4 EXTERIOR DRAWINGS”.)
Otherwise, you may be injured if touching the
rotating scanner unit by accident.
Do not touch the radiator. Even if the power is turned
off, the radiator may be rotated by the wind.
8.3 MAINTENANCE ON EACH UNIT
8.3.1 Scanner Unit NKE-1125/1129/1130/1139
After the work, turn "ON" the antenna-unit safety switch.