- III -
●PRECAUTIONS●
DANGER
Never conduct inspection or repair work of equipment componts.
Inspection or repair work by uncertified personnel may result in fire
hazard or electric shock.
For inspection and repair work of equipment components, consult with
our branch office, branch shop, salea office, or our distributor in your
district.
When conducting maintenance, make sure to turn the main power off.
Failure may result in electric shock.
Turn off the main power before cleaning the equipment. Especially
when a rectifier is used, make sure to turn it off since voltage is still
outputted from the rectifier even after the indicator and the radar are
tumed off. Failure may result in equipment failure, or death or serious
injury due to electric shock.
When conducting maintenance work on the scanner, make sure to turn
its main power off.
Failure may result in electric shock or injuries.
Make sure to turn off the scanner safety switch. Failure may result in
injuries caused by physical contact with the rotating scanner.
To Next Page
Loading...
Need help?
General
