7-28
7.4 Maintenance Menu
yyy
yyyy
7
Confirm computer virus dose not exit beforehand in USB
memory when reading and writing of the file by using USB
memory drive.
Influences other equipment when display unit is infected
with the virus, and causes the breakdown.
7.4.2 Save of Internal Memory Data
The system can save internal memory data such as item settings with the menu. If the hard disk in the system
has been replaced, the set values before the circuit replacement can be restored by reading the set values you
saved before the replacement.
[I] Backup of Internal Settings (Data Backup)
Save the internal memory data, such as item settings in menus, into USB memory card or other drive.
The internal memory data should be saved at completion of system setting, and the operation condition should
be saved periodically.
For radars that display unit software version before 2.00.
Procedures 1. Open the Serviceman Menu.
2. Perform the following menu open procedure to open the Internal to
backup menu.
Maintenance Menu
→ Data Backup
3. Left click the right side combo box, and select the backup storage.
4. Select the file name to want to backup from the list in the left side.
The Copy>> button becomes valid.
5. Left click the Copy>> button.
Start the backup.
6. As displaying message of “File Copy Completed”, left click the OK .
WARNING
To Next Page
Loading...
Need help?
General
