4-14
4
4.1 Use of Navigation Tools
y
yyy
[3] Operation Area
If All is selected for [2] Operation Mode, this function sets an area for displaying parallel index
lines.
One Side :Parallel index lines are displayed only on one side.
Both Sides :Parallel index lines are displayed on both sides.
[4] Display for Individual Line
Determines whether to turn on / off the parallel index line display of a selected number.
On :The line of the selected number is displayed.
Off :The line of the selected number is not displayed.
If All is selected for [2] Operation Mode, the line near the own ship is line1.
If Track or Equiangular is selected for [2] Operation Mode, Line1 , Line3 , Line5 ,
and Line7 correspond to Group1 , Group2 , Group3 , and Group4 , respectively.
To Next Page
Loading...
Need help?
General
