5-33
Displaying AIS Target Information [TGT DATA]
Procedures 1 Right-click in the PPI.
The setting items for cursor modes will be displayed.
2 Left-click TGT Data .
Cursor mode becomes TGT Data.
3 Put the cursor on the AIS target of which information is to be displayed
and left-click.
The information of the selected AIS target will be displayed.
Reference:
When the numeric data of a target is displayed but the mark " " is not on the radar display,
the target is outside the display.
Canceling AIS Target Information Display (CNCL Data)
Procedures 1 Right-click in the PPI.
The setting items for cursor modes will be displayed.
2 Left-click Cancel TGT Data .
Cursor mode becomes Cancel TGT Data.
3 Put the cursor on the activated AIS target of which information display is
to be cancelled, and left-click.
The information display of the selected AIS target will be cleared.
Selecting Detail / Simple Mode for AIS Target Information Display
Procedures 1 Left-click the button in the Digital Information located at the center
right of the display.
The detail or simple mode display for AIS target information will be selected.
To Next Page
Loading...
Need help?
General
