5-56
5.6 Track Function
yy
yyy
5
Saving File (Save)
Procedures 1 Open the File Operations menu by performing the following menu
operation.
TT
→ Target Track Setting
→ File Operations
2 Left-click the Save button.
The Input File Name menu will appear.
3 Input the file name to be saved.
Up to ten characters can be input as a file name.
For inputs to the characters input screen, refer to section “3.3.6 Operation on Numeric
Value, Latitude / Longitude and Character Input menu”.
After the input, the confirmation window will appear.
4 Left-click Yes to save the file.
The currently displayed target track data will be saved.
※ While only transmitting radar, saving file is enabled.
To Next Page
Loading...
Need help?
General
