121
13 Configuration
Batches Batch 1 Start/Stop to
Batch 9 Start/Stop
Signal for controlling batch reporting
Alarm digital
inputs
Alarm digital input 1 to 54 Alarm signal of the digital input
Digital variables Digital variable 1 to 54 Value of digital variables
Alarm digital vari-
ables
Alarm digital var. 1 to 54 Alarm signal of digital variables
Alarm counters/
integrators
Alarm 1 counter 1 to 27 Alarm signal of alarm type 1 of the counter/
integrator
Alarm 2 counter 1 to 27 Alarm signal of alarm type 2 of the counter/
integrator
Group alarms Alarm pos. tol. group 1 to 9 Positive tolerance band alarm signal of group
Alarm neg. tol. group 1 to 9 Negative tolerance band alarm signal of group
Alarm_Group 1 to 9 Collective alarm of group
Alarm analog
inputs
Alarm 1 analog inp. 1 to 54 Alarm signal of alarm type 1 of the alarm input
Alarm 2 analog inp. 1 to 54 Alarm signal of alarm type 2 of the alarm input
Alarm analog
variables
Alarm 1 analog var. 1 to 54 Alarm signal of alarm type 1 of the analog vari-
ables
Alarm 2 analog var. 1 to 54 Alarm signal of alarm type 2 of the analog vari-
ables
Alarm integer
variables
Alarm 1 integer var. 1 to 16 Alarm signal of alarm type 1 of the integer vari-
ables
Alarm 2 integer var. 1 to 16 Alarm signal of alarm type 2 of the integer vari-
ables
Batch Batch 1 active to Batch 9 active Signal is active when batch is active
Alarm batch 1 to 9 Collective alarm of batch
Category Signal Description
To Next Page
