14 Configuration – in setup program only
234
14.6.8 Input objects
Input float
Setup dialog
Parameter
Parameter Selection/settings Description
Destination Variable to which the entered value is written.
Inactive No variable selected.
Select module and corresponding vari-
able.
The variable must be of the "Float" data
type.
Comma format Select comma format (drop-down
menu).
Number of post-decimal places of the
displayed value
Minimum value Enter value (-99999 to +99999). Lower limit of the admissible input range
Maximum value Enter value (-99999 to +99999). Upper limit of the admissible input range
Text
(as of system ver-
sion 03)
Enter text. The text appears in the title bar of the
input mask when the input object is
opened.
Behaviour when
deleting
(as of system ver-
sion 02)
Value when pressing the "Delete" button.
Set to zero The value is set to 0.
Set to no input "-----" The value is set to "no input".
To Next Page
