JUMO mTRON T - Controller Screen

13 Configuration
134
13.4.6 Controller screen
Setup dialog
Parameter
Grid Color 147 Color used to display the grid in the
"Diagram" visualization.
 Chapter 7.2 "Diagram", page 56
Alarm refer. curve Color 217 Color used to display an analog channel
when it leaves a tolerance band.
 Chapter 13.11.1 "Analog channels",
page 152
Parameter Selection/settings Description
Parameter Selection/settings Description
Color of back-
ground
Color 83 Background color for the controller
screens.
 Chapter 6 "Multichannel controller
module", page 51
Color setpoint
value
Color 7 Color for the numerical display of the
setpoint value in the controller screens.
 Chapter 6 "Multichannel controller
module", page 51