JUMO mTRON T - Barcode

269
16 Appendix
16.3 Barcode
Barcode scanners must be initialized once by the user prior to use. Using the example of a bar-
code scanner with a serial interface, the following steps are sufficient:
16.3.1 Batch control
Batch 1
Batch 2
Batch 3
Batch 4
Batch 5
Step Activity
1 Scanning the "Factory Default Settings" barcode
2 Scanning the "Select RS-232 Standard" barcode
BAT CH1
BAT CH2
BAT CH3
BAT CH4
BAT CH5