195
13 Configuration
13.18.2 NV connecting lists: Digital
Setup dialog – Digital input
Parameter
Parameter Selection/settings Description
Digital input/
Value
Select input to be connected. List of the digital inputs of the multifunc-
tion panel
If a connection has already been config-
ured, the module and its signal are dis-
played in the "Value" column.
Digital input 1
(Example)
This is the previously configured digital input.
Select the module and – in the selector
to the right – the signal that is to be con-
nected to the digital input.
List of modules in the system and the
relevant signals
To Next Page
