JUMO mTRON T - Page 66

7 Visualization
66
Group selection
This function is used to directly select and display one of the active groups. Simply touch one
of the group designations displayed after calling up the function.
Memory display
This function is used to start the display of the data available in the history memory.
 Chapter 8 "Memory display (History)", page 85
Numerical measured value display
This function can be used to show and hide the numerical measured value display (diagram
header) and the digital tracks, and to activate the envelope diagram display.
 Chapter 5.1.2 "Visualization window", page 45
Group rotation
In contrast to the "Group selection" function, in which any group can be selected, this function
displays the groups one after the other.
Home button
This function calls up a defined visualization. The function must be activated and configured
via the setup program.
 Setup program:
HMI > C
ONFIGURATION LEVEL > SCREEN > USER OPERATING LEVEL
NOTE!
The function is only available if more than one group is active.
(1)
(1) Group number
NOTE!
The function is only available if more than one group is active.