CHAPTER 14
Installing the MX5, MX10, MX40, and
MX80 Routers
•
MX5, MX10, MX40, and MX80 Installation Summary on page 83
•
Tools Required to Install MX5, MX10, MX40, and MX80 Chassis in the Rack on page 84
•
Installing MX5, MX10, MX40, and MX80 Chassis in the Rack on page 85
MX5, MX10, MX40, and MX80 Installation Summary
To install the router:
1. Prepare your installation site.
See “MX5, MX10, MX40, and MX80 Site Preparation Checklist” on page 44.
2. Review the safety guidelines and warnings:
•
See General Safety Guidelines for Juniper Networks Devices.
•
See General Safety Warnings for Juniper Networks Devices.
3. Unpack the router and verify the parts:
a. See “Unpacking MX5, MX10, MX40, and MX80 Routers” on page 75.
b. See “Verifying the MX5, MX10, MX40, and MX80 Routers Parts Received” on
page 76.
4. Install the mounting hardware.
See “Moving the Mounting Brackets for Center-Mounting MX5, MX10, MX40, and
MX80 Routers” on page 80.
5. Lift the router onto the rack.
See “Installing MX5, MX10, MX40, and MX80 Chassis in the Rack” on page 85.
6. Connect cables to the network and external devices:
83Copyright © 2017, Juniper Networks, Inc.
To Next Page
Loading...
