Juniper MX10 - Compliance Statements for NEBS; Compliance Statements for Acoustic Noise for MX5, MX10, MX40, and MX80

Compliance Statements for NEBS
•
The equipment is suitable for installation as part of the Common Bonding Network
(CBN).
•
The equipment is suitable for installation in locations where the National Electrical
Code (NEC) applies.
•
The battery return connection is to be treated as an isolated DC return (i.e. DC-I), as
defined in GR-1089-CORE.
•
For Juniper Networks systems with AC power supplies, an external surge protective
device (SPD) must be used at the AC power source.
Compliance Statements for Acoustic Noise for MX5, MX10, MX40, and MX80 Routers
The router complies with NEBS Level 3 requirements:
•
GR-63-CORE: NEBS, Physical Protection
•
GR-1089-CORE:EMC and Electrical SafetyforNetworkTelecommunications Equipment
Copyright © 2017, Juniper Networks, Inc.232
MX5, MX10, MX40, and MX80 3D Universal Edge Router Hardware Guide