the color coding for the leads on the power cables that attach to the terminal
studs on each power supply.
WARNING: For field-wiring connections, use copper conductors only.
CAUTION: Power cords and cables must not block access to device
components or drape where people could trip on them.
Related
Documentation
MX5, MX10, MX40, and MX80 Power System Description on page 35•
• Maintaining the MX5, MX10, MX40, and MX80 Power Supplies on page 161
• Replacing an MX5, MX10, MX40, and MX80 DC Power Supply on page 143
• MX5, MX10, MX40, and MX80 DC Power Electrical Safety Guidelines
• MX5, MX10, MX40, and MX80 Routers DC Power Specifications on page 59
• PowerConsumption for a DC-Powered MX5, MX10, MX40, and MX80 Router on page 60
• DC Power Circuit Breaker Requirements for the MX5, MX10, MX40, and MX80 Routers
on page 62
• DC Power Cable Specifications for MX5, MX10, MX40, and MX80 Routers on page 63
DC Power Cable Specifications for MX5, MX10, MX40, and MX80 Routers
•
DC Power Cable Lug Specifications on page 63
•
DC Power Cable Specifications on page 64
DC Power Cable Lug Specifications
The accessory box shipped with the router includes the cable lugs that attach to the
terminal of each power supply.
Figure 29: DC Power Cable Lug
g000100
All m easu remen t s in inch es
.90
.68
0 .25
.14 dia .
.170 m ax.
wi re diam et er
(insu lation)
63Copyright © 2017, Juniper Networks, Inc.
Chapter 9: DC Power Specifications and Requirements
To Next Page
Loading...
Need help?
General
