Keysight B2980B User’s Guide, Edition 1 145
Front Panel Reference
Display and Assist/Function Keys
#3 (B2985B/B2987B) Sequential measurement.
See “Sequential measurement” on
page 147.
#4 Demo slide show. See “Demo slide show” on
page 149.
#5 About B298nB, where B298nB is the model
number. See “About B298nB” on page 149.
System Menu Assigns the system menu items to the softkeys of the function
keys. To cancel the assignment, press the Cancel/Local key.
For the system menu, see “System Menu” on page 170.
Applications
This section describes the applications started from the Apps #1 to #5 assist keys
described above.
Setup integrity
checker
This checks the electric noise in the present measurement environment. For
details of this function, see “Setup Integrity Checker” on page 247. The “SIC”
(Setup Integrity Checker) license is required to enable this checking function.
If the #1 assist key is pressed, a confirmation dialog box is opened. Press OK to
open the Setup Integrity Checker panel, and display the following assist keys and
function key.
Assist Keys
Check Starts the noise checking and changes the softkey label to
Abort.
Abort Aborts the noise checking and changes the softkey label to
Check.
Export Saves the noise checking result file into the root folder on a
USB flash drive connected to the front panel USB-A connector,
with a predetermined file name:
MECMMDDhhmmss.csv
Where, MM means a month, DD means a day, hh means a
hour, mm means a minute, and ss means a second.
Function Key
Close Closes the Setup Integrity Checker panel.
To Next Page
Loading...
Need help?
General
