Figure 78. Pulling out the server
a. Slide the server all the way out until it stops.
b.
Push up the latches on the rails.
c.
With three people, lift up the server to remove it from the rails completely. Place the server
on a flat and sturdy surface.
Step 4. Remove the inner rails from the server.
Rack Front
Figure 79. Removing the inner rails
a. Push the blue tab to release the latch.
b.
Push the inner rail backwards until the T-pins on the server disengaged from the inner rail.
Step 5. Repeat the previous step to the other rail.
After you finish
Carefully lay the server on a flat, static-protective surface.
92
ThinkSystem SR630 V4 User Guide
To Next Page
Loading...
