Note: For some M.2 backplanes that support two identical M.2 drives, install the M.2 drive in slot 0
first.
Figure 138. M.2 drive slot
1 Slot 0
2 Slot 1
Step 3. Install the M.2 backplane onto the chassis.
Figure 139. M.2 backplane installation
a. Align the notch of the M.2 backplane with the pin on the chassis, and then place down the
M.2 backplane.
b.
Tighten the screw to secure the M.2 backplane.
Step 4. Install the M.2 drive on the M.2 backplane.
Chapter 5. Hardware replacement procedures 145
To Next Page
Loading...
