Step 14. To remove the Processor Neptune
TM
Core Module (NeptCore), see “Remove the Lenovo Processor
Neptune
TM
Core Module” on page 158
.
After you finish
If you are instructed to return the component or optional device, follow all packaging instructions, and use
any packaging materials for shipping that are supplied to you.
Install the manifold (in-row system)
Follow the instructions to install the manifold in an in-row direct water cooling system.
About this task
Important: This task must be operated by trained technicians that are certified by Lenovo Service. Do not
attempt to remove or install it without proper training and qualification.
CAUTION:
The liquid might cause irritation to the skin and eyes. Avoid direct contact with the liquid.
S002
CAUTION:
The power-control button on the device and the power switch on the power supply do not turn off the
electrical current supplied to the device. The device also might have more than one power cord. To
remove all electrical current from the device, ensure that all power cords are disconnected from the
power source.
S011
CAUTION:
Sharp edges, corners, or joints nearby.
S038
CAUTION:
Eye protection should be worn for this procedure.
S040
198
ThinkSystem SR630 V4 User Guide
To Next Page
Loading...
