a. Press the release latch.
b.
Rotate the security bezel outward to remove it from the chassis.
After you finish
If you are instructed to return the component or optional device, follow all packaging instructions, and use
any packaging materials for shipping that are supplied to you.
Install the security bezel
Use this information to install the security bezel.
About this task
Attention:
• Read
“Installation Guidelines” on page 57 and “Safety inspection checklist” on page 58 to ensure that you
work safely.
• Keep static-sensitive parts in their static-protective packages until installation to prevent exposure to
static electricity. Handle the parts with an electrostatic-discharge wrist strap or other grounding systems.
Place the parts on a static-protective surface.
Procedure
Step 1. If you have removed the rack latches, reinstall them. See
“Install the rack latches” on page 231.
Step 2. If the key is held inside the security bezel, remove it out of the security bezel.
Figure 300. Key removal
a. Press the latch to release the key.
b.
Remove the key from the retaining clip in the shown direction.
Step 3. Install the security bezel to the chassis.
Chapter 5. Hardware replacement procedures 261
To Next Page
Loading...
