Lenovo ThinkSystem SR630 V4 - Remove the Manifold (In-Rack System)

Figure 167. Manifolds in a 42U in-row
system
Figure 168. Manifolds in a 42U in-rack
system
Figure 169. Manifolds in a 48U in-rack
system
Figure 170. 42U in-row hose kit
Figure 171. 42U in-rack connection
set
Figure 172. 48U in-rack connection
set
1 Two left spools on supply manifold
2 Two right spools on return manifold
•
“Remove the manifold (in-rack system)” on page 169
• “Install the manifold (in-rack system)” on page 177
• “Remove the manifold (in-row system)” on page 189
• “Install the manifold (in-row system)” on page 198
Remove the manifold (in-rack system)
Follow the instructions to remove the manifold in an in-rack direct water cooling system.
Chapter 5. Hardware replacement procedures 169