Complete the parts replacement. See “Complete the parts replacement” on page 288.
Complete the parts replacement
Go through the checklist to complete parts replacement
To complete the parts replacement, do the following:
1. Ensure that all components have been reassembled correctly and that no tools or loose screws are left
inside your server.
2. Properly route and secure the cables in the server. Refer to detailed cable routing information for each
component in
Internal Cable Routing Guide.
3. If you have removed the top cover, reinstall it. See
“Install the top cover” on page 284.
4. Reconnect external cables and power cords to the server.
Attention: To avoid component damage, connect the power cords last.
288
ThinkSystem SR630 V4 User Guide
To Next Page
Loading...
