Complete the parts replacement. See “Complete the parts replacement” on page 288.
Lenovo Processor Neptune
TM
Air Module replacement (trained
technicians only)
Follow the instructions in this section to remove and install the Processor Neptune
TM
Air Module (NeptAir).
Important: This task must be operated by trained technicians that are certified by Lenovo Service. Do not
attempt to remove or install it without proper training and qualification.
•
“Remove the Lenovo Processor Neptune
TM
Air Module” on page 151
• “Install the Lenovo Processor Neptune
TM
Air Module” on page 153
Remove the Lenovo Processor Neptune
TM
Air Module
Follow the instructions in this section to remove the Processor Neptune
TM
Air Module (NeptAir).
Important: This task must be operated by trained technicians that are certified by Lenovo Service. Do not
attempt to remove or install it without proper training and qualification.
About this task
Safety information for leakage detection sensor module cable
S011
CAUTION:
Sharp edges, corners, or joints nearby.
Attention:
• Read
“Installation Guidelines” on page 57 and “Safety inspection checklist” on page 58 to ensure that you
work safely.
• Power off the server and peripheral devices and disconnect the power cords and all external cables. See
“Power off the server” on page 75.
• Keep static-sensitive parts in their static-protective packages until installation to prevent exposure to
static electricity. Handle the parts with an electrostatic-discharge wrist strap or other grounding systems.
Place the parts on a static-protective surface.
Prepare the following screwdrivers to ensure you can install and remove the corresponding screws properly.
Torque screwdriver type list
Screw Type
Torx T30 head screwdriver Torx T30 screw
Procedure
Step 1. To remove the server from the rack, see
“Remove the server from the rack (friction rails)” on page
82 and “Install the server to the rack (slide rails)” on page 93.
Step 2. Remove the top cover. See
“Remove the top cover” on page 282.
Chapter 5. Hardware replacement procedures 151
To Next Page
Loading...
