Lenovo ThinkSystem SR630 V4 - Serial Port Module Replacement

Figure 301. Security bezel installation
a. Insert the tab on the security bezel into the slot on the right rack latch.
b.
Press and hold the blue release latch.
c.
Rotate the security bezel inward until the left side clicks into place.
Step 4. Use the key to lock the security bezel to the closed position.
Figure 302. Locking the security bezel
After you finish
Complete the parts replacement. See “Complete the parts replacement” on page 288.
Serial port module replacement
Use this information to remove and install a serial port module.
262
ThinkSystem SR630 V4 User Guide