Figure 103. Installing the front riser cage
a. Push the front riser cage into the chassis.
b.
Tighten the screw on the rear of the front riser cage to secure it to the chassis.
After you finish
Complete the parts replacement. See
“Complete the parts replacement” on page 288.
Front riser card and PCIe adapter replacement
Follow instructions in this section to remove and install a front adapter assembly and PCIe adapter.
•
“Remove the front riser card and PCIe adapter” on page 112
• “Install the front riser card and PCIe adapter” on page 115
Remove the front riser card and PCIe adapter
Follow the instructions in this section to remove the front riser card and PCIe adapter.
About this task
Attention:
• Read
“Installation Guidelines” on page 57 and “Safety inspection checklist” on page 58 to ensure that you
work safely.
• Power off the server and peripheral devices and disconnect the power cords and all external cables. See
“Power off the server” on page 75.
112
ThinkSystem SR630 V4 User Guide
To Next Page
Loading...
