b. Pull the front riser cage out of the chassis.
Step 4. Remove the front adapter assembly and PCIe adapter from the front riser cage, see
“Remove the
front riser card and PCIe adapter” on page 112
.
After you finish
If you are instructed to return the component or optional device, follow all packaging instructions, and use
any packaging materials for shipping that are supplied to you.
Install the front riser cage
Follow the instructions in this section to install the front riser cage.
About this task
Attention:
• Read
“Installation Guidelines” on page 57 and “Safety inspection checklist” on page 58 to ensure that you
work safely.
• Power off the server and peripheral devices and disconnect the power cords and all external cables. See
“Power off the server” on page 75.
• Keep static-sensitive parts in their static-protective packages until installation to prevent exposure to
static electricity. Handle the parts with an electrostatic-discharge wrist strap or other grounding systems.
Place the parts on a static-protective surface.
Procedure
Step 1. Install the front adapter assembly and PCIe adapter to the front riser cage, see
“Install the front
riser card and PCIe adapter” on page 115
.
Step 2. Remove the top cover. See
“Remove the top cover” on page 282.
Step 3. Install the front riser cage.
Chapter 5. Hardware replacement procedures 111
To Next Page
Loading...
