Deploy the operating system
Several options are available to deploy an operating system on the server.
Available operating systems
• Microsoft Windows Server
• Red Hat Enterprise Linux
• SUSE Linux Enterprise Server
• Canonical Ubuntu
Complete list of available operating systems:
https://lenovopress.lenovo.com/osig.
Tool-based deployment
• Multi-server
Available tools:
– Lenovo XClarity Administrator
https://pubs.lenovo.com/lxca/compute_node_image_deployment
– Lenovo XClarity Essentials OneCLI
https://pubs.lenovo.com/lxce-onecli/onecli_r_uxspi_proxy_tool
• Single-server
Available tools:
– Lenovo XClarity Provisioning Manager
“OS Installation” section in the LXPM documentation compatible with your server at
https://
pubs.lenovo.com/lxpm-overview/
– Lenovo XClarity Essentials OneCLI
https://pubs.lenovo.com/lxce-onecli/onecli_r_uxspi_proxy_tool
Manual deployment
If you cannot access the above tools, follow the instructions below, download the corresponding OS
Installation Guide, and deploy the operating system manually by referring to the guide.
1. Go to
https://datacentersupport.lenovo.com/solutions/server-os.
2. Select an operating system from the navigation pane and click Resources.
3. Locate the “OS Install Guides” area and click the installation instructions. Then, follow the instructions to
complete the operation system deployment task.
Back up the server configuration
After setting up the server or making changes to the configuration, it is a good practice to make a complete
backup of the server configuration.
Make sure that you create backups for the following server components:
• Management processor
You can back up the management processor configuration through the Lenovo XClarity Controller
interface. For details about backing up the management processor configuration, see:
296
ThinkSystem SR630 V4 User Guide
To Next Page
Loading...
