Lenovo ThinkSystem SR630 V4 - About this Task; Attention; Install Rear M.2 Backplane; Power off the Server and Peripheral Devices and Disconnect the Power Cords and All External Cables. See Power off the Server on Page

Figure 251. Removing M.2 backplane
a. Loosen one screw the locks the backplane to the cage.
b.
Slide the backplane as illustrated above and lift it off from the cage.
After you finish
If you are instructed to return the component or optional device, follow all packaging instructions, and use
any packaging materials for shipping that are supplied to you.
Install rear M.2 backplane
Follow the instructions in this section to install the rear M.2 backplane.
About this task
Attention:
• Read
“Installation Guidelines” on page 57 and “Safety inspection checklist” on page 58 to ensure that you
work safely.
• Power off the server and peripheral devices and disconnect the power cords and all external cables. See
“Power off the server” on page 75.
• Keep static-sensitive parts in their static-protective packages until installation to prevent exposure to
static electricity. Handle the parts with an electrostatic-discharge wrist strap or other grounding systems.
Place the parts on a static-protective surface.
Procedure
Step 1. Install the rear M.2 backplane to the M.2 cage.
246
ThinkSystem SR630 V4 User Guide