CAUTION:
Protective gloves should be worn for this procedure.
S042
DANGER
Risk of electric shock due to water or a water solution which is present in this product. Avoid
working on or near energized equipment with wet hands or when spilled water is present.
Attention:
• Read
“Installation Guidelines” on page 57 and “Safety inspection checklist” on page 58 to ensure that you
work safely.
• Power off the server and peripheral devices and disconnect the power cords and all external cables. See
“Power off the server” on page 75.
• Keep static-sensitive parts in their static-protective packages until installation to prevent exposure to
static electricity. Handle the parts with an electrostatic-discharge wrist strap or other grounding systems.
Place the parts on a static-protective surface.
• Ensure proper handling procedures are followed when working with any chemically treated liquid used in
the rack cooling system. Ensure that material safety data sheets (MSDS) and safety information are
provided by the liquid chemical treatment supplier and that proper personal protective equipment (PPE) is
available as recommended by the liquid chemical treatment supplier. Protective gloves and eyewear may
be recommended as a precaution.
• This task requires two or more people.
Procedure
Step 1. To install the Processor Neptune
TM
Core Module (NeptCore), see
“Install the Lenovo Processor
Neptune
TM
Core Module” on page 161
.
Step 2. To install the server into the rack, see
“Install the server to the rack (friction rails)” on page 85 or
“Install the server to the rack (slide rails)” on page 93.
Step 3. Install the manifold.
Chapter 5. Hardware replacement procedures 199
To Next Page
Loading...
