CAUTION:
Hazardous moving fan blades nearby. Keep fingers and other body parts away.
Attention:
• Read
“Installation Guidelines” on page 57 and “Safety inspection checklist” on page 58 to ensure that you
work safely.
• Power off the server and peripheral devices and disconnect the power cords and all external cables. See
“Power off the server” on page 75.
• Keep static-sensitive parts in their static-protective packages until installation to prevent exposure to
static electricity. Handle the parts with an electrostatic-discharge wrist strap or other grounding systems.
Place the parts on a static-protective surface.
• If you intend to install memory modules in the server, you must first remove the air baffle from the server.
Procedure
Step 1. Remove the top cover. See
“Remove the top cover” on page 282.
Step 2. Grasp the air baffle and carefully lift it out of the server.
Figure 87. Air baffle removal
Attention: Operating the server with the air baffle removed might damage server components. For
proper cooling and airflow, install the air baffle before you power on the server.
After you finish
If you are instructed to return the component or optional device, follow all packaging instructions, and use
any packaging materials for shipping that are supplied to you.
98
ThinkSystem SR630 V4 User Guide
To Next Page
Loading...
