Figure 134. Disconnecting the M.2 cable
a.
Pull up the latch on the M.2 cable.
b.
Disconnect the M.2 cable from the M.2 backplane.
Step 3. Remove the M.2 drive from the M.2 backplane.
Note: The M.2 backplane you want to remove might be different from the following illustrations,
but the removal method is the same.
Figure 135. M.2 drive removal
a. Press both sides of the 2 retainer.
b.
Slide the retainer backward to loosen the M.2 drive from the M.2 backplane.
c.
Rotate the M.2 drive away from the M.2 backplane.
142
ThinkSystem SR630 V4 User Guide