S017
CAUTION:
Hazardous moving fan blades nearby. Keep fingers and other body parts away.
Attention:
• Read
“Installation Guidelines” on page 57 and “Safety inspection checklist” on page 58 to ensure that you
work safely.
• Power off the server and peripheral devices and disconnect the power cords and all external cables. See
“Power off the server” on page 75.
• Keep static-sensitive parts in their static-protective packages until installation to prevent exposure to
static electricity. Handle the parts with an electrostatic-discharge wrist strap or other grounding systems.
Place the parts on a static-protective surface.
Procedure
Step 1. Remove the top cover. See
“Remove the top cover” on page 282.
Step 2. Grasp the fan tabs on both ends of the system fan-pack and carefully lift the system fan-pack out
of the server.
Figure 315. System fan-pack removal
After you finish
1. Install a new system fan-pack or install a fan filler to cover the place. See “Install a system fan-pack” on
page 281
.
2. If you are instructed to return the component or optional device, follow all packaging instructions, and
use any packaging materials for shipping that are supplied to you.
280
ThinkSystem SR630 V4 User Guide
To Next Page
Loading...
