Server model with no backplane
Table 10. Components on the front of the server
Callout Callout
1 USB 3.2 Gen 1 (5Gbps) connector
2 Diagnostics panel
3 External LCD connector 4 USB 3.2 Gen 1 (5Gbps) connector
5 Mini DisplayPort connector
6 Rack latch (right)
7 Pull-out information tab
8 Rack latch (left)
9 Drive fillers
Front components overview
Front I/O module
The front I/O module of the server provides controls, connectors, and LEDs. The front I/O module varies by
model. Depending on server models, the server supports the following front I/O modules.
Figure 2. FIO module with USB/MiniDP
Figure 3. Standard FIO module
The module supports two USB connectors, one MiniDP
connector and a front operator panel.
The module supports a front operator panel.
22 ThinkSystem SR630 V4 User Guide
To Next Page
Loading...
