Top view with standard heat sinks
Figure 10. Top view with standard heat sinks
Table 17. Components on the top view with standard heat sinks
1 Power supply units 2 Riser assemblies
3 System board assembly
4 Processor and heat sink module
5 Memory modules
6 System fan-packs
7 Intrusion switch 8 Internal M.2 drive module
9 Front backplane
Notes:
1. The illustration shows the server rear configuration with two riser assemblies. The server rear
configurations vary by server model. For details, see
“Rear view” on page 23.
Chapter 2. Server components 29
To Next Page
Loading...
