Lenovo ThinkSystem SR630 V4 - Page 4

Install a hot-swap power supply unit . . . . . 136
Internal M.2 backplane and M.2 drive
replacement . . . . . . . . . . . . . . . . 141
Remove the internal M.2 backplane and M.2
drive . . . . . . . . . . . . . . . . . 141
Adjust the retainer on the internal M.2
backplane . . . . . . . . . . . . . . . 143
Install the internal M.2 backplane and M.2
drive . . . . . . . . . . . . . . . . . 144
Intrusion switch replacement . . . . . . . . . 147
Remove an intrusion switch . . . . . . . . 147
Install an intrusion switch . . . . . . . . . 149
Lenovo Processor Neptune
TM
Air Module
replacement (trained technicians only) . . . . . . 151
Remove the Lenovo Processor Neptune
TM
Air
Module . . . . . . . . . . . . . . . . 151
Install the Lenovo Processor Neptune
TM
Air
Module . . . . . . . . . . . . . . . . 153
Lenovo Processor Neptune
TM
Core Module
replacement (trained technicians only) . . . . . . 158
Remove the Lenovo Processor Neptune
TM
Core Module . . . . . . . . . . . . . . 158
Install the Lenovo Processor Neptune
TM
Core
Module . . . . . . . . . . . . . . . . 161
Manifold replacement (trained technicians
only) . . . . . . . . . . . . . . . . . . . 168
Remove the manifold (in-rack system) . . . . 169
Install the manifold (in-rack system) . . . . . 177
Remove the manifold (in-row system) . . . . 189
Install the manifold (in-row system) . . . . . 198
Memory module replacement . . . . . . . . . 210
Remove a memory module . . . . . . . . 210
Install a memory module . . . . . . . . . 211
MicroSD card replacement . . . . . . . . . . 213
Remove the MicroSD card . . . . . . . . . 213
Install the MicroSD card. . . . . . . . . . 215
PCIe adapter replacement. . . . . . . . . . . 216
Remove a PCIe adapter . . . . . . . . . . 216
Install a PCIe adapter . . . . . . . . . . . 218
Processor and heat sink replacement (trained
technicians only) . . . . . . . . . . . . . . 219
Remove a processor and heat sink . . . . . 219
Separate the processor from carrier and heat
sink. . . . . . . . . . . . . . . . . . 223
Install a processor and heat sink . . . . . . 225
Rack latches replacement . . . . . . . . . . . 231
Remove the rack latches . . . . . . . . . 231
Install the rack latches . . . . . . . . . . 231
Rear drive assembly replacement . . . . . . . . 232
Remove the 2.5-inch rear drive assembly . . . 232
Install the 2.5-inch rear drive assembly . . . . 233
Rear M.2 assembly replacement . . . . . . . . 236
Disassemble the rear M.2 interposer and
drive . . . . . . . . . . . . . . . . . 237
Assemble the rear M.2 interposer and
drive . . . . . . . . . . . . . . . . . 240
Remove rear hot-swap M.2 interposer and
drive assembly . . . . . . . . . . . . . 243
Install rear hot-swap M.2 interposer and drive
assembly . . . . . . . . . . . . . . . 244
Remove the rear M.2 backplane . . . . . . 245
Install rear M.2 backplane . . . . . . . . . 246
Remove the rear M.2 cage . . . . . . . . . 247
Install rear M.2 cage . . . . . . . . . . . 248
Rear OCP module replacement. . . . . . . . . 249
Remove the rear OCP module . . . . . . . 249
Install the rear OCP module . . . . . . . . 250
Rear riser card replacement . . . . . . . . . . 251
Remove a rear riser card . . . . . . . . . 255
Install a rear riser card . . . . . . . . . . 257
Security bezel replacement . . . . . . . . . . 259
Remove the security bezel . . . . . . . . . 259
Install the security bezel. . . . . . . . . . 261
Serial port module replacement . . . . . . . . 262
Remove a serial port module . . . . . . . . 263
Install a serial port module . . . . . . . . . 264
System board assembly replacement (trained
technicians only) . . . . . . . . . . . . . . 267
System I/O board replacement (trained
technicians only). . . . . . . . . . . . . 268
Processor board replacement (trained
technicians only). . . . . . . . . . . . . 273
System fan-pack replacement . . . . . . . . . 279
Remove a system fan-pack . . . . . . . . 279
Install a system fan-pack . . . . . . . . . 281
Top cover replacement . . . . . . . . . . . . 282
Remove the top cover . . . . . . . . . . 282
Install the top cover . . . . . . . . . . . 284
USB I/O board replacement . . . . . . . . . . 285
Remove the USB I/O board . . . . . . . . 285
Install the USB I/O board . . . . . . . . . 287
Complete the parts replacement . . . . . . . . 288
Chapter 6. System configuration . . . 289
Set the network connection for the Lenovo XClarity
Controller . . . . . . . . . . . . . . . . . 289
Update the firmware . . . . . . . . . . . . . 289
Configure the firmware . . . . . . . . . . . . 293
Enable Software Guard Extensions (SGX). . . . . 294
RAID configuration . . . . . . . . . . . . . 294
Deploy the operating system. . . . . . . . . . 296
Back up the server configuration . . . . . . . . 296
ii ThinkSystem SR630 V4 User Guide