Lenovo ThinkSystem SR630 V4 - Page 83

Configura-
tion
1,2
• Backplane-less configuration
• 4 x 2.5'' NVMe
• 8 x 2.5'' NVMe
• 10 x 2.5'' NVMe
Max. Ambient
Temp. (at sea
level)
35°C 30°C
CPU TDP
(watts)
185 ≤ TDP ≤ 205 205 < TDP ≤
250
250 < TDP ≤
300
300 < TDP ≤ 350
Heat sink
Processor Neptune
TM
Air Module (NeptAir)
Air baffle
x
Fan type Performance
DIMM
capacity
≤ 64 GB
Max. DIMM
Qty.
32
Notes:
1. The server models installed with NeptAir module do not support rear drives or GPUs.
2. The server models installed with NeptAir module do not support 4 x 2.5'' front drives with front adapter
assembly.
When the server is installed with below adapters
with the AOC transceiver:
Follow below rules:
• ThinkSystem Broadcom 57508 100GbE
QSFP56 2-Port OCP Ethernet Adapter
• ThinkSystem Nvidia ConnectX-7 NDR200/
HDR QSFP112 2-port PCIe Gen5 x16
InfiniBand Adapter
• Must use high-performance fan-packs.
• The ambient temperature must be limited to
27°C or lower when CPU TDP ≥ 250W.
• The ambient temperature must be limited to
30°C or lower when CPU TDP < 250W.
When the server is installed with rear M.2 drive assembly, must install an M.2 drive heat sink.
Server models with NeptCore module
This section provides thermal information for server models installed with the Processor Neptune
TM
Core
Module (NeptCore).
Configuration
• Backplane-less configuration
• 4 x 2.5'' NVMe
• 8 x 2.5'' NVMe
• 10 x 2.5'' NVMe
CPU TDP (watts)
TDP ≤ 350
Max. Ambient Temp. (at sea
level)
35°C
Max. Liquid
1
inlet Temp. (at
sea level)
45°C
Heat sink Processor Neptune
TM
Core Module (NeptCore)
Chapter 5. Hardware replacement procedures 73