Lenze I/O system 1000 - Conventions used

1 About this documentation
1.2 Conventions used
11
Lenze · I/O system 1000 · Reference Manual · DMS 5.0 EN · 09/2016 · TD17
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
1.2 Conventions used
This documentation uses the following conventions to distinguish between different types of
information:
Type of information Highlighting Examples/notes
Spelling of numbers
Decimal separator Point The decimal point is always used.
For example: 1234.56
Decimal [0 ... 9] No prefix is used.
Hexadecimal 0x[0 ... F] 0x60F4
Exception: The prefix (0x) in a table is not needed if the table
head contains the reference to a hexadecimal number.
Binary 0b[0/1] 0b11
Exception: The prefix (0b) in a table is not needed if the table
head contains the reference to a binary number.
Text
Version information Blue text colour All information that only applies to or from a certain
software version of the inverter is marked correspondingly in
this documentation.
Example: This function extension is available from software
version V3.0!
Index name I-[Index] For a clear distinction for the Lenze codes (Cxxxx), the indices
of the process data objects contain a prefix "I-", e.g. B. I-1400
for the RxPDO1.
Program name » « The Lenze PC software »PLC Designer«...
Window italics The message window... / The Options dialog box ...
Variable names Setting bEnable to TRUE...
Control element bold The OK button ... / The Copy command ... / The Properties tab
... / The Name input field ...
Sequence of menu
commands
If several commands must be used in sequence to carry out a
function, the individual commands are separated by an
arrow. Select File
 Open to...
Shortcut <bold> Use <F1> to open the online help.
If a key combination is required for a command, a "+" is
placed between the key identifiers: With <Shift>+<ESC>...
Program code Courier
IF var1 < var2 THEN
a = a + 1
END IF
Keyword Courier bold
Hyperlink underlined
Optically highlighted reference to another topic. It is
activated with a mouse-click in this online documentation.
Icons
Page reference ( 11) Optically highlighted reference to another page. It is
activated with a mouse-click in this online documentation.
Step-by-step instructions

Step-by-step instructions are indicated by a pictograph.