Lenze I/O system 1000 - Access to Diagnostic Data

8 DeviceNet communication
8.2 Access to the I/O system 1000
409
Lenze · I/O system 1000 · Reference Manual · DMS 5.0 EN · 09/2016 · TD17
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
8.2.3 Access to diagnostic data
The DeviceNet bus coupler exclusively supports passive diagnostics, i.e. no alarm activation on the
module side is required for diagnostics. You have to request the diagnostics by yourself.
For this purpose, go to your configuration tool and select the diagnostic data of the corresponding
DeviceNet slot. All diagnostic data of the module will be displayed as byte sequence.
DeviceNet bus coupler
Class code: 100 (0x64)
I/O compound module
Class code:
Slot 1: 101 (0x65)
Slot 2: 102 (0x66)
...
Slot 64: 164 (0xA4)
No. Name Information Format Example
1 DeviceName Device name String EPM-S150
2 HwVersion HW output version String 02
3 SwVersion SW output version String V101
4 SerialNumber Serial number Unsigned16,
String
00000205
5 FpgaVersion FPGA version Unsigned16,
String
V208
6 MxFile Mx file String MX000053.101
7 ProductVersion Product version String 01V01.00
8 OrderCode Order No. String (8-digit Lenze material
number)
No. Name Information Format Example
1 DeviceName Device name String EPM-S403
2 HwVersion HW output version String 21
3 SwVersion SW output version String V202
4 SerialNumber Serial number Unsigned32,
String
00001143
5 FpgaVersion FPGA version Unsigned16,
String
V208
6 MxFile Mx file String MX000028.130
7 ProductVersion Product version String 01V31.001
8 OrderCode Order No. String (8-digit Lenze material
number)
20 Parameter Parameter data String x00 x00 x31 x31 x31 x31
21 Diagnostics Diagnostic data String x00 x15 x00 x00
x73 x08 x04 x00
x00 x00 x00 x00
x00 x00 x00 x00
4x000020EB