Lenze I/O system 1000 - 5.19.3 Status of the digital inputs

5 CANopen communication
5.19 Diagnostics
189
Lenze · I/O system 1000 · Reference Manual · DMS 5.0 EN · 09/2016 · TD17
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
5.19.3 Status of the digital inputs
Use index I-6000 to have the status of the digital inputs displayed.
5.19.4 Status of the digital outputs
Use index I-6200 to have the status of the digital outputs displayed:
5.19.5 Status of the analog inputs
Use index I-6401 to have the status of the analog inputs displayed.
5.19.6 Status of the analog outputs
Use index I-6411 to have the status of the analog outputs displayed:
Index Name Possible settings Info
Lenze Selection
I-6000 Digital input 0 {1} 255 Read only, digital input status
1Byte 1
2Byte 2
... ...
80 Byte 80
Index Name Possible settings Info
Lenze Selection
I-6200 * Digital output 0 {1} 255 • Digital output status
• The outputs can be set
manually (forcing):
• Depending on the CAN status
and on I-2360
1Byte 1
2Byte 2
... ...
80 Byte 80
Index Name Possible settings Info
Lenze Selection
I-6401 Analog input -32768 {1} 32767 Read only, analog input status
1 Channel 1
2 Channel 2
... ...
36 Channel 36
Index Name Possible settings Info
Lenze Selection
I-6411 * Analog output -32768 {1} 32767 • Analog output status
• The outputs can be set
manually (forcing):
• Depending on the CAN status
and on I-2360
1 Channel 1
2 Channel 2
... ...
36 Channel 36