Lenze I/O system 1000 - Parameterising Technology Modules; Digital Outputs with PWM Functionality - EPM-S620

7 EtherCAT communication
7.10 Parameterising technology modules
367
Lenze · I/O system 1000 · Reference Manual · DMS 5.0 EN · 09/2016 · TD17
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
7.10 Parameterising technology modules
7.10.1 2 digital outputs with PWM functionality - EPM-S620
Parameter data
Subindex Name Description/value Lenze
01 PWM 0: period Set parameters here for the total time for pulse duration and
pulse pause. The time should be selected as a factor for the
20.83 ns basis.
Values below 25 s are ignored. If the pulse duration is higher or
equal to the period, the DO output is set permanently.
Value range: 1200 ... 8388607 (25 s ... approx. 175 ms)
0x1F40
02 PWM 1: period 0x1F40