Lenze I/O system 1000 - 5.10.3 1 counter 32 bits, 24 V DC - EPM-S600

Lenze · I/O system 1000 · Reference Manual · DMS 5.0 EN · 09/2016 · TD17 138
5 CANopen communication
5.10 Parameterising the counter
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
5.10.3 1 counter 32 bits, 24 V DC - EPM-S600
The following functions can be parameterised:
Counting functions Description
Continuous counting The counter counts from the loading value to the counting limit, then skips to the opposite
counting limit and continues to count from there.
Counting once The counter counts once/periodically from the loading value in the specified counting range.
Counting periodically
Signal evaluation Description
Single rotary
transducer
Connection to "A/pulse" input
Double rotary
transducer
Quadruple rotary
transducer
Connection to input "A/pulse" and "B/direction"
Direction Pulse at "A/pulse" input and direction at "B/direction" input