Lenze I/O system 1000 - ID-Related Diagnostics

6 PROFIBUS communication
6.11 Diagnostics
317
Lenze · I/O system 1000 · Reference Manual · DMS 5.0 EN · 09/2016 · TD17
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
6.11.2 ID-related diagnostics
The ID-related diagnostics serves to inform in which PROFIBUS slot (module) an error has occurred.
More information on the error can be obtained with the module status and the channel-related
diagnostics. The ID-related diagnostics can be activated via the parameterisation.
Diagnostic data
Byte Function
x Bit 5 ... 0:
• 0b001001 (fix): Length of the ID-related diagnostics
Bit 7 ... 6:
• 0b01 (fix): Code for the ID-related diagnostics
x + 1 The bits of the modules per PROFIBUS slot are set if:
• the module is removed;
• a non-projected module is plugged-in;
• a module cannot be accessed;
• a module reports a diagnostic alarm.
Bit 0: Entry of module in PROFIBUS slot 1
...
Bit 7: Entry of module in PROFIBUS slot 8
x + 2 Bit 0: Entry of module in PROFIBUS slot 9
...
Bit 7: Entry of module in PROFIBUS slot 16
x + 3 Bit 0: Entry of module in PROFIBUS slot 17
...
Bit 7: Entry of module in PROFIBUS slot 24
x + 4 Bit 0: Entry of module in PROFIBUS slot 25
...
Bit 7: Entry of module in PROFIBUS slot 32
x + 5 Bit 0: Entry of module in PROFIBUS slot 33
...
Bit 7: Entry of module in PROFIBUS slot 40
x + 6 Bit 0: Entry of module in PROFIBUS slot 41
...
Bit 7: Entry of module in PROFIBUS slot 48
x + 7 Bit 0: Entry of module in PROFIBUS slot 49
...
Bit 7: Entry of module in PROFIBUS slot 56
x + 8 Bit 0: Entry of module in PROFIBUS slot 57
...
Bit 7: Entry of module in PROFIBUS slot 64