Lenze I/O system 1000 - Page 300

Lenze · I/O system 1000 · Reference Manual · DMS 5.0 EN · 09/2016 · TD17 300
6 PROFIBUS communication
6.10 Parameterising technology modules
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
0x80 3 ZNA (HIGH byte) Time after request (ZNA)
Waiting time to be complied with until the next transmit
request is executed.
0 ... 65535 [ms] (0x0000 ... 0xFFFF)
0x00
4 ZNA (LOW byte) 0x00
Option 4 / 5, character delay time
0x80 5 Character delay time
(HIGH byte)
Character delay time; the character delay time defines the
max. permissible interval between two received characters
within a frame.
If the character delay time is 0, the module independently
calculates the character delay time on the basis of the baud
rate (approx. the double character time).
0 ... 65535 [ms] (0x0000 ... 0xFFFF)
0x00
6Character delay time
(LOW byte)
0xFA
Option 6, number of receive buffers
0x80 7 Number of receive
buffers
Defines the number of receive buffers. As long as only one
receive buffer is used and is assigned, no more data can be
received. If up to 250 receive buffers are connected, the
received data can be redirected to a still free receive buffer.
1 ... 255 (0x01 ... 0xFF)
0x01
Option 7 ... 12, reserved
0x80 8
...
13
Reserved 0x00
Data set Name Description/value Lenze
No. Byte