Lenze I/O system 1000 - Page 35

3 Configuring the I/O system in the »Engineer«
3.2 Mapping the real station layout in the »Engineer«
35
Lenze · I/O system 1000 · Reference Manual · DMS 5.0 EN · 09/2016 · TD17
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
 How to create a new project for a connected device:
1. If the start-up wizard has not been displayed yet, click the icon or select the FileNew...
command to call the start-up wizard.
Step 1 - What would you like to do?
2. Select the New project (upload data from system) option.
3. Click the Next button.
Step 2 - Properties
4. Enter the corresponding properties of the projects into the input fields (name, order
number, etc.).
• You can always change the properties subsequently.
• Later you will find the name as project name in the Project view.
5. Click the Next button.