3 Configuring the I/O system in the »Engineer«
3.2 Mapping the real station layout in the »Engineer«
39
Lenze · I/O system 1000 · Reference Manual · DMS 5.0 EN · 09/2016 · TD17
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
4. Enter the corresponding properties of the projects into the input fields (name, order
number, etc.).
• You can always change the properties subsequently.
• Later you will find the name as project name in the Project view.
5. Click the Next button.
Step 3 - Storage location
6. The Name entered before is suggested as project name. If required, change the suggestion
accordingly.
• The project name is also the name for the project directory to be created.
7. Specify the storage location for the project directory in the Directory input field.
• If the specified directory does not exist, it will be created.
• As an alternative you can select an existing directory in your workspace environment via
the Browse... button.
•If you select the Always save projects here option, the indicated directory will be the
standard memory location for new projects.
8. Click the Complete button.
•The Insert a component dialog box appears.
To Next Page
Loading...