Lenze I/O system 1000 - Page 446

Lenze · I/O system 1000 · Reference Manual · DMS 5.0 EN · 09/2016 · TD17 446
8 DeviceNet communication
8.6 Parameterising the encoder evaluation
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
6Bit length of encoder
data
Enter the bit length of the encoder data here. Depending on
the encoder, the encoder data consist of the current encoder
value with subsequent bits. The total length has to be
specified here. More information on this can be found in the
data sheet for your encoder.
7 (0x07) = "8 bits"
8 (0x08) = "9 bits"
9 (0x09) = "10 bits"
10 (0x0A) = "11 bits"
11 (0x0B) = "12 bits"
12 (0x0C) = "13 bits"
13 (0x0D) = "14 bits"
14 0x0E) = "15 bits"
15 (0x0F) = "16 bits"
16 (0x10) = "17 bits"
17 (0x11) = "18 bits"
18 (0x12) = "19 bits"
19 (0x13) = "20 bits"
20 (0x14) = "21 bits"
21 (0x15) = "22 bits"
22 (0x16) = "23 bits"
23 (0x17) = "24 bits"
24 (0x18) = "25 bits"
25 (0x19) = "26 bits"
26 (0x1A) = "27 bits"
27 (0x1B) = "28 bits"
28 (0x1C) = "29 bits"
29 (0x1D) = "30 bits"
30 (0x1E) = "31 bits"
31 (0x1F) = "32 bits"
0x18
Position in
string
Name Description/value Lenze
No.