Lenze i410 - Page 292

8992 0x2320 CiA: Short circuit/earth leakage (internal) Keypad display: E
arth leak
Cause Remedy Error type/response
•
Short cir
cuit/earth fault of motor cable
•
Capacive charging current of the motor
c
able too high.
•
Check mot
or cable.
•
Check length of the motor cable.
•
Use shorter or lower-capacitance motor
cable.
Fault
•
The in
verter is disabled immediately. The
motor has no torque (coasts).
•
The error can only be reset aer a blocking
me.
Blocking me: 5 s
9024 0x2340 CiA: Short circuit (device internal) Keypad display: Mot
or shorted
Cause Remedy Error type/response
Short circuit of motor cable Check motor cable for short circuit. Fault
•
The in
verter is disabled immediately. The
motor has no torque (coasts).
•
The error can only be reset aer a blocking
me.
Blocking me: 5 s
9040 0x2350 CiA: i²*t overload (thermal state) Keypad display: i2t mot
or
Cause Remedy Error type/response
Motor thermally overloaded, e. g. by an
impermissible connuous current or by
fr
equent or too long acceleraon processes.
•
Check driv
e sizing.
•
Check machine/driven mechanics for
excessive load.
•
Check
sengs of the motor data.
•
Reduce values for slip compensaon
0x2B09:001 (P315.01), 0x2B09:002 (P315.02)
and oscillaon damping 0x2B0A:001
(P318.01), 0x2B0A:002 (P318.02).
Fault (congurable)
•
The err
or can only be reset aer a blocking
me.
Blocking me: 5 s
Seng parameters: 0x2D4B:003
(P308.03)
Related topics
4Mot
or overload monitoring (i²*t) ^ 190
9090 0x2382 I*t error Keypad display: Ixt err
or
Cause Remedy Error type/response
Device
ulisaon (I*t) too high by frequent and
too long acceleraon processes.
Check drive sizing.
•
Reduce the maximum overload current of
the inverter 0x6073 (P324.00).
•
In case of high mass ineras, reduce
maximum overload current of the inverter
0x6073 (P324.00) to 150 %.
Fault (congurable)
•
The err
or can only be reset aer a blocking
me.
Blocking me: 3 s
Seng parameters: 0x2D40:005
(P135.05)
Related topics
4De
vice overload monitoring (i*t) ^ 225
9091 0x2383 I*t warning Keypad display: Ixt w
arning
Cause Remedy Error type/response
Device
ulisaon (I*t) too high by frequent and
too long acceleraon processes.
Check drive dimensioning. Warning
Related topics
4De
vice overload monitoring (i*t) ^ 225
Diagnoscs and fault eliminaon
Error codes, causes and remedies
292